Download Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2).pass4sureexam.300-075.2020-01-09.1e.312q.vcex


Download Exam

File Info

Exam Implementing Cisco IP Telephony & Video, Part 2 v1.0
Number 300-075
File Name Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2).pass4sureexam.300-075.2020-01-09.1e.312q.vcex
Size 10.15 Mb
Posted January 09, 2020
Downloads 25



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

  • A: On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
  • B: On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
  • C: On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
  • D: On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.



Question 2
Refer to the exhibit. 

  

Which statement is true?

  • A: Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.
  • B: If the VCS receives a call to an unknown IP address, it queries its neighbors for the remote address and if permitted, it routes the call through the neighbor.
  • C: Endpoints that are registered directly to the VCS can call only an IP address of a system that is also registered directly to that VCS.
  • D: Dialing by IP address is not supported on VCS.



Question 3
Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

  • A: The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.
  • B: A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
  • C: The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061.
  • D: A SIP trunk security profile must be configured with Device Security Mode set to TLS.
  • E: A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS certificate.
  • F: The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On.
  • G: The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off.



Question 4
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)

  • A: The traversal server zone on Expressway-C must have a TLS verify subject name configured.
  • B: The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
  • C: The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
  • D: The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
  • E: The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.



Question 5
Which two options are configuration steps on Cisco Unified Communications Manager that are used when integrating with VCS Expressway servers? (Choose two.)

  • A: allowing numeric dialing from Cisco phones to Expressway
  • B: configuring a device pool with video feature enabled
  • C: allowing dialing to Expressway domain from Cisco phones
  • D: creating an application user on Cisco Unified Communications Manager with assigned privileges
  • E: adding the Expressway servers to the Application Servers list



Question 6
Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)

  • A: The Advanced Networking or Dual Network Interfaces option key has been installed.
  • B: VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.
  • C: VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.
  • D: With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload traffic exiting the LAN1 interface.



Question 7
If delegated credentials checking has been enabled and remote workers can register to the Expressway, which statement is true?

  • A: H.323 message credential checks are delegated.
  • B: SIP registration proxy mode is set to On in the Expressway.
  • C: A secure neighbor zone has been configured between the Expressway and the Expressway Control.
  • D: SIP registration proxy mode is set to Off in the Expressway.



Question 8
Which two statements regarding you configuring a traversal server and traversal client relationship are true? (Choose two.)

  • A: VCS supports only the H.460.18/19 protocol for H.323 traversal calls.
  • B: VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls.
  • C: VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls.
  • D: If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client to the traversal server for SIP signaling.
  • E: A VCS Expressway located in the public network or DMZ acts as the firewall traversal client.



Question 9
What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence endpoints?

  • A: CS3 (24)
  • B: EF (46)
  • C: AF41 (34)
  • D: CS4 (32)



Question 10
When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41?

  • A: Set QoS mode to DiffServ and tag value 32.
  • B: Set QoS mode to IntServ and tag value to 34.
  • C: Set QoS mode to DiffServ and tag value 34.
  • D: Set QoS mode to IntServ and tag value to 32.
  • E: Set QoS mode to ToS and tag value to 32.








ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset