Download Introducing Cisco Data Center Networking.selftestengine.200-150.2020-01-17.1e.102q.vcex
Download Exam
File Info
| Exam | Introducing Cisco Data Center Networking |
| Number | 200-150 |
| File Name | Introducing Cisco Data Center Networking.selftestengine.200-150.2020-01-17.1e.102q.vcex |
| Size | 2.43 Mb |
| Posted | January 17, 2020 |
| Downloads | 14 |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: EXAMFILESCOM
With discount: 20%
Demo Questions
Question 1
View the Exhibit.
Refer to the exhibit. Two Layer 2 Cisco Nexus switches are connected to application servers in a data center. Server A cannot communicate with servers that are in VLANs 3 and 4, but it can communicate with server B and C.
What is the cause of the problem?
Refer to the exhibit. Two Layer 2 Cisco Nexus switches are connected to application servers in a data center. Server A cannot communicate with servers that are in VLANs 3 and 4, but it can communicate with server B and C.
What is the cause of the problem?
- A: InterVLAN routing is not enabled on both switches.
- B: Switch 1 and switch 2 are not physically connected via an access link.
- C: A router must be connected to both switches and provide InterVLAN routing.
- D: Switch 1 and switch 2 are not physically connected via a trunk link.
Question 2
Which two features must be licensed on a Cisco Nexus 7000 Switch? (Choose two.)
- A: Virtual Port Channel
- B: Layer 3
- C: Virtual Device Contexts
- D: iSCSI
- E: Fibre Channel
Question 3
View the exhibit.
Refer to the exhibit. What type of network communication is depicted?
Refer to the exhibit. What type of network communication is depicted?
- A: 802.3 frame
- B: TCP packet
- C: UDP packet
- D: Ethernet frame
Question 4
A network engineer wants to apply for new license key file.
Which command should be used to obtain the switch serial number?
Which command should be used to obtain the switch serial number?
- A: MDS-A# show license serial-number
- B: MDS-A# show running-config | include serial-number
- C: MDS-A# show host-id
- D: MDS-A# show license host-id
Question 5
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:
Exhibit 1.
Exhibit 2.
Exhibit 3.
Exhibit 4.
Which statement regarding Cisco Nexus 5000 Series switches is true?
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:
Exhibit 1.
Exhibit 2.
Exhibit 3.
Exhibit 4.
Which statement regarding Cisco Nexus 5000 Series switches is true?
- A: Cisco Nexus5000 Series switches operate in IP routing mode.
- B: Cisco Nexus 5000 Series switches operate in FCoE mode.
- C: Cisco Nexus 5000 Series switches operate in fabric mode.
- D: Cisco Nexus 5000 Series switches operate in NPV mode.
Question 6
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:
Exhibit 1.
Exhibit 2.
Exhibit 3.
Exhibit 4.
What can you tell about server ports and their external interfaces from the exhibits?
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:
Exhibit 1.
Exhibit 2.
Exhibit 3.
Exhibit 4.
What can you tell about server ports and their external interfaces from the exhibits?
- A: vfc 3/1 is not correctly connected to server external interface fc2/1.
- B: vfc 3/1 is not correctly connected to server external interface fc2/1 and flogi are unsuccessful.
- C: Server interface vfc 3/1 is assigned to NP uplinks fc2/1, fc2/2, fv2/3, and fc2/4. There are 4 successful flogi.
- D: Server interface vfc 3/1 is assigned to NP uplinks fc2/1, fc2/2, fv2/3, and fc2/4. There are 4 flogi are in initialization state.
Question 7
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:
Exhibit 1.
Exhibit 2.
Exhibit 3.
Exhibit 4.
Which two statements are true regarding disruptive load balancing and regarding the configuration in this example? (Choose two.)
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.
Topology:
Exhibit 1.
Exhibit 2.
Exhibit 3.
Exhibit 4.
Which two statements are true regarding disruptive load balancing and regarding the configuration in this example? (Choose two.)
- A: In this scenario disruptive load balancing is disabled.
- B: In this scenario disruptive load balancing is enabled.
- C: Since FCID: 0x1c0000 is reserved, disruptive load balancing is not configured correctly.
- D: When disruptive load balancing is enabled, NPV redistributes the server interfaces across all available NP uplinks when a new NP uplink becomes operational. To move a server interface from one NP uplink to another NP uplink, NPV forces reiinitialization of the server interface so that the server performs a new login to the core switch.
Question 8
A network design team has decided to use a standard protocol to consolidate the Ethernet and SAN data using the existing Nexus switches.
Which I/O technology can satisfy this need?
Which I/O technology can satisfy this need?
- A: FCoE
- B: IEEE 802.1AB
- C: SCSI
- D: AToM
Question 9
Which command set will create an access control list on a Cisco Nexus switch to permit only unencrypted Web traffic from any source to destination host 10.10.1.110?
- A: N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80
- B: N5K-A(config)#ip access-list 101N5K-A(config-acl)#permit tcp any host 10.10.1.110 eq 80N5K-A(config-acl)#permit ip any any
- C: N5K-A(config)#ipaccess-list 101N5K-A(config-acl)#permit tcp any host 10.10.1.110 eq 80
- D: N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80N5K-A(config)#access-list 101 deny ip any any
Question 10
An administrator connected a new server to a Cisco MDs 9222i on Port FCL/20, but did not capture the world wide name of the host bus adapter.
Which command returns the needed information?
Which command returns the needed information?
- A: show wwn status
- B: show interface fc 1/20
- C: show flogi database
- D: show fcs database
HOW TO OPEN VCEX AND EXAM FILES
Use ProfExam Simulator to open VCEX and EXAM files
HOW TO OPEN VCE FILES
Use VCE Exam Simulator to open VCE files
