Download Introducing Cisco Data Center Networking.pass4sureexam.200-150.2019-06-19.1e.93q.vcex

Download Dump

File Info

Exam Introducing Cisco Data Center Networking
Number 200-150
File Name Introducing Cisco Data Center Networking.pass4sureexam.200-150.2019-06-19.1e.93q.vcex
Size 1.9 Mb
Posted June 19, 2019
Downloads 28



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
View the Exhibit. 

  

Refer to the exhibit. Two Layer 2 Cisco Nexus switches are connected to application servers in a data center. Server A cannot communicate with servers that are in VLANs 3 and 4, but it can communicate with server B and C. 
What is the cause of the problem?

  • A: InterVLAN routing is not enabled on both switches.
  • B: Switch 1 and switch 2 are not physically connected via an access link.
  • C: A router must be connected to both switches and provide InterVLAN routing.
  • D: Switch 1 and switch 2 are not physically connected via a trunk link.



Question 2
Which two options describe functions of the data center aggregation layer? (Choose two.)

  • A: services layer
  • B: high-speed packet switching
  • C: repeater
  • D: access control
  • E: QoS marking



Question 3
Which two options are valid VTP commands? (Choose two.)

  • A: vtp version
  • B: vtp VLAN
  • C: vtp client mode
  • D: vtp static
  • E: feature vtp



Question 4
Which two options are multicast addresses? (Choose two.)

  • A: FD00::2
  • B: 192.168.2.2
  • C: FF05::2
  • D: 226.10.10.10
  • E: 240.1.0.1



Question 5
What is the minimum number of fabric modules that should be installed in the Cisco Nexus 7000 chassis for N 1 redundancy using M1-Series line card?

  • A: 3
  • B: 4
  • C: 5
  • D: 6



Question 6
Which type of media uses electromagnetic waves that are generated by lasers, is often used in campus backbones, and is capable of transmitting to a distance of 60 kilometers?

  • A: shielded twisted-pair cable
  • B: coaxial cable
  • C: multimode fiber-optic cable
  • D: single-mode fiber-optic cable



Question 7
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. 
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel. 
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button. 
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions. 
Topology:

  

Exhibit 1. 

  

Exhibit 2. 

  

Exhibit 3. 

  

Exhibit 4. 

  

Which statement regarding Cisco Nexus 5000 Series switches is true?

  • A: Cisco Nexus5000 Series switches operate in IP routing mode.
  • B: Cisco Nexus 5000 Series switches operate in FCoE mode.
  • C: Cisco Nexus 5000 Series switches operate in fabric mode.
  • D: Cisco Nexus 5000 Series switches operate in NPV mode.



Question 8
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. 
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel. 
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button. 
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions. 
Topology:

  

Exhibit 1. 

  

Exhibit 2. 

  

Exhibit 3. 

  

Exhibit 4. 

  

What can you tell about server ports and their external interfaces from the exhibits?

  • A: vfc 3/1 is not correctly connected to server external interface fc2/1.
  • B: vfc 3/1 is not correctly connected to server external interface fc2/1 and flogi are unsuccessful.
  • C: Server interface vfc 3/1 is assigned to NP uplinks fc2/1, fc2/2, fv2/3, and fc2/4. There are 4 successful flogi.
  • D: Server interface vfc 3/1 is assigned to NP uplinks fc2/1, fc2/2, fv2/3, and fc2/4. There are 4 flogi are in initialization state.



Question 9
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. 
To access the multiple- choice questions, click on the numbered boxes on the left of the top panel. 
There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button. 
Scenario:
Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions. 
Topology:

  

Exhibit 1. 

  

Exhibit 2. 

  

Exhibit 3. 

  

Exhibit 4. 

  

Which two statements are true regarding disruptive load balancing and regarding the configuration in this example? (Choose two.)

  • A: In this scenario disruptive load balancing is disabled.
  • B: In this scenario disruptive load balancing is enabled.
  • C: Since FCID: 0x1c0000 is reserved, disruptive load balancing is not configured correctly.
  • D: When disruptive load balancing is enabled, NPV redistributes the server interfaces across all available NP uplinks when a new NP uplink becomes operational. To move a server interface from one NP uplink to another NP uplink, NPV forces reiinitialization of the server interface so that the server performs a new login to the core switch.



Question 10
Which command set will create an access control list on a Cisco Nexus switch to permit only unencrypted Web traffic from any source to destination host 10.10.1.110?

  • A: N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80
  • B: N5K-A(config)#ip access-list 101N5K-A(config-acl)#permit tcp any host 10.10.1.110 eq 80N5K-A(config-acl)#permit ip any any
  • C: N5K-A(config)#ipaccess-list 101N5K-A(config-acl)#permit tcp any host 10.10.1.110 eq 80
  • D: N5K-A(config)#access-list 101 permit tcp any host 10.10.1.110 eq 80N5K-A(config)#access-list 101 deny ip any any









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset