Download Risk Based Inspection.Actualtests.API-580.2018-09-03.1e.73q.vcex


Download Exam

File Info

Exam Risk Based Inspection
Number API-580
File Name Risk Based Inspection.Actualtests.API-580.2018-09-03.1e.73q.vcex
Size 28 Kb
Posted September 03, 2018
Downloads 21



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
For qualitative RBI analysis it is important to establish a set of rules to assure consistency in 

  • A: Categorization or classification
  • B: Segregation
  • C: Ranking



Question 2
Generally, a qualitative analysis using broad ranges requires a __________________ from the user than a quantitative approach.

  • A: Higher level of judgment, skill and understanding
  • B: Lower level of judgment, skill and understanding



Question 3
Potential source of errors in RBI analysis regarding data quality are the following except

  • A: If the base line thickness were not performed the nominal thickness may be used for the original thickness 
  • B: If original thickness not available, averaged at thickness readings may be used
  • C: If the original thickness not available, maximum at thickness readings may be used



Question 4
Potential source of errors in RBI analysis regarding data quality are the following except

  • A: Assumptions in equipment history
  • B: Outdated drawings and documentation
  • C: Inspector error
  • D: Advanced inspection methods



Question 5
The following assumption can be made that significantly impact the calculated corrosion rate early in the equipment life

  • A: If the base line thickness were not performed the nominal thickness may be used for the original thickness
  • B: If original thickness not available, averaged at thickness readings may be used
  • C: If the original thickness not available, maximum at thickness readings may be used



Question 6
________________ may result in the calculated corrosion rate appearing artificially high or low.

  • A: Clerical error
  • B: Measurement error
  • C: Inspector error
  • D: At scanning



Question 7
Who should be consulted to define the equipment deterioration mechanisms, susceptibility and potential failure modes?

  • A: A metallurgist or corrosion specialist
  • B: A metallurgist and corrosion specialist
  • C: A metallurgist only
  • D: Corrosion specialist only



Question 8
_________ are the primary inputs into the probability of failure evaluation. 

  • A: The deterioration mechanisms, rates and susceptibilities
  • B: Loss of containment f fluid
  • C: Fluid toxicity and its concentration
  • D: Damage mechanisms and its severity



Question 9
Is key to performing deterioration mechanism identification

  • A: Understanding equipment operation and the interaction with the chemical and mechanical environment
  • B: Understanding equipment operation and process upsets
  • C: Understanding equipment operation and its safety protective measures



Question 10
Who can provide useful input (such as the spectrum of process conditions, injection points etc.) To aid materials specialists in the identification of deterioration mechanisms and rates

  • A: Process specialists
  • B: Plant operation specialists
  • C: Asset integrity experts
  • D: Inspection engineers








ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset